Install guide
Loading your map onto a Lowrance
From the download link to the satellite picture on your screen, in six steps. It takes about ten minutes. If you ordered the SD card, the maps are already on it: start at step 4.
What you need
- A computer with an SD card reader (a USB reader works).
- An SD or microSD card that fits your unit. Up to 32 GB is safest.
- Your Lowrance. Compatible with Lowrance HDS Live, Carbon, Gen 3, Gen 2 & Elite Ti / Ti2 / FS units.
-
1 Download the map
Open the email we sent when your payment went through and click Download next to the map. The same links are on your order page. Use a computer (Windows or Mac) rather than a phone, because you will need to copy the map onto a card.
Map files are big (about 150 MB to over 1 GB), so use Wi-Fi or fibre and let the download finish before you open it. Each click on Download uses one of your 5 downloads, and the link works for 30 days, so keep the file somewhere safe once you have it.
-
2 Unzip it
The download is a .zip file. Your Lowrance can't read a zip, so open it up first:
- Windows: right-click the zip file and choose Extract All, then click Extract.
- Mac: double-click the zip file.
You now have a folder named after the dam. Inside it is a folder of map files ending in .at5. Don't rename, move or delete any of them: the unit needs them all, together.
-
3 Copy it onto the SD card
Put the SD card into your computer's card reader (or a USB card reader) and open it in File Explorer or Finder.
Drag the dam's folder (the one you just unzipped) onto the card. Wait until the copy has completely finished, then eject the card safely (Windows: right-click the card and choose Eject; Mac: drag it to the bin) before you pull it out.
Got more than one dam? Copy each dam's folder onto the card side by side. Keep each dam in its own folder, because different dams use the same file names inside.
-
4 Put the card in your Lowrance
Switch the unit off, push the card into the card slot until it clicks, close the slot cover and switch on. Older HDS units have a full-size SD slot: a microSD card in an SD adapter works there.
-
5 Choose the map as your chart source
- Open the Chart page.
- Press MENU (on a touchscreen, tap Menu).
- Go to Chart options, then Chart source.
- Pick your dam from the list. Our maps are named after the dam, often ending in JSM.
Steps 5 and 6 on a Lowrance HDS 7: Chart options, Chart source, then View, Photo overlay, Full. -
6 Turn on the satellite picture
- Still in Chart options, go to View.
- Set Photo overlay to Full.
- Press EXIT until the menus close, then zoom in (ZIN or pinch) over the dam.
The satellite picture of the dam now fills the chart, with your boat moving across it.
If it doesn't show
My dam isn't in the Chart source list
- Check the card is pushed fully into the slot, then switch the unit off and on again.
- Make sure you unzipped the download. A .zip file on the card won't show.
- Check the folder copied completely: on the computer, compare the size of the folder on the card with the one you unzipped.
- Older units read cards up to 32 GB formatted FAT32. A bigger card, or one formatted exFAT or NTFS, may not be read.
The screen is plain white or blank
The map only covers the dam. If you're at home or at the slipway, scroll the cursor over to the dam and zoom in. Also check Photo overlay is set to Full under Chart options, View.
How do I get my normal chart back?
Go to Chart options, Chart source and choose your usual chart again (for example Lowrance, Navionics or C-MAP). The Mapster map stays on the card for next time.
My unit's menus look different
The names move a little between models and software versions. Look for the same two settings: Chart source (to pick the dam) and Photo overlay (set to Full). If you can't find them, send us your model or a photo of the screen and we'll talk you through it.
The short version
To keep on your phone or send to a friend who's helping you.
How to load your Mapster map onto a Lowrance 1. Download the map from the link in your order email, on a computer. 2. Unzip it (Windows: right-click > Extract All. Mac: double-click). 3. Copy the dam's folder onto the SD card. Don't rename anything. Eject the card safely. 4. Switch the Lowrance off, put the card in, switch on. 5. Chart page > MENU > Chart options > Chart source > choose the dam. 6. Chart options > View > Photo overlay > Full. 7. EXIT, then zoom in over the dam. Full guide and video: https://mapster.co.za/install
Still stuck?
Send us your Lowrance model and order number, or a photo of the screen, and we'll get you going.